Leyden Jar

S

The Leyden jar originated about 1746 through the work of Dutch physicist Pieter van Musschenbroek of the University of Leyden and Ewald Georg von Kleist of Pomerania, working independently.

A Leyden jar consists of a glass jar with an outer and inner metal coating covering the bottom and sides nearly to the neck. A brass rod terminating in an external knob passes through a wooden stopper and is connected to the inner coating by a loose chain. When an electrical charge is applied to the external knob, positive and negative charges accumulate from the two metal coatings respectively, but they are unable to discharge due to the glass between them.  The result is that the charges will hold each other in equilibrium until a discharge path is provided. Leyden jars were first used to store electricity in experiments, and later as a condenser in early wireless equipment.

http://www.sparkmuseum.com/LEYDEN.HTM


12″ Leyden Jar
c. 1885


Early gold leaf Leyden Jars
1st half 19th century


Battery of six Leyden Jars


“Franklin’s Bells”
Late 18th Century


Leyden Jar with
Lane’s Discharging Electrometer
1890

A Lane apparatus is a Leyden Jar fitted with a calibrated spark gap. They were used primarily in medical applications, in order to regulate the amount of voltage applied to the patient.


Demonstration
Leyden Jar

This jar can be separated into three parts: The outer metal can, the glass jar, and the inner metal electrode. It was used to demonstrate that the charge in a Leyden jar is held in the glass, not the metal.


Horizontal Leyden Jar
English
1830


Leyden Jars from Spark Gap Transmitter
c. 1910


Ducretet Leyden Jar Battery
1865


Early American Leyden Jars Likely Daniel Davis
1840’s

Electrical Sportsman
Joseph Wightman
1840’s