The water organ or hydraulic organ is a kind of pipe organ. As in the pipe organ, the sound is made by air blowing through the pipes, but power to make the air blow does not come from bellows or from electricity as in the modern organ, but from water, for example from a waterfall.
A hydraulis is an early type of pipe organ that was powered by water. It was invented in the 3rd century B.C., probably by the Hellenistic scientist Ctesibius of Alexandria. It was the world’s first keyboard instrument. Many centuries later it developed into the modern pipe organ.
The water organ works by having water and air arriving together in the camera aeolis (wind chamber). Here, water and air separate and the compressed air is driven into a wind-trunk on top of the camera aeolis, to blow the organ pipes. Two perforated ‘splash plates’ or ‘diaphragms’ stop the water spray from getting into the organ pipes.
The water, having been separated from the air, leaves the camera aeolis at the same speed as it enters. It then drives a water wheel, which in turn drives the musical cylinder and the movements attached. To start the organ, the tap above the entry pipe is turned on and, given a continuous flow of water, the organ plays until the tap is closed again.
During the Renaissance many Italian gardens had water organs. The most famous water organ of the 16th century was at the Villa d’Este in Tivoli. It was about 6 metres high and was powered by a beautiful waterfall. It could play three pieces automatically, but there was also a keyboard.
Singing Ringing Tree (Panopticons)
Location in the Borough of Burnley
|Artist||Mike Tonkin and Anna Liu|
|Dimensions||3 m (9.8 ft)|
Completed in 2006, it is part of the series of four sculptures within the Panopticons arts and regeneration project created by the East Lancashire Environmental Arts Network (ELEAN). The project was set up to erect a series of 21st-century landmarks, or Panopticons (structures providing a comprehensive view), across East Lancashire as symbols of the renaissance of the area.
Designed by architects Mike Tonkin and Anna Liu of Tonkin Liu, the Singing Ringing Tree is a 3-metre tall construction comprising pipes of galvanised steel which harness the energy of the wind to produce a slightly discordant and penetrating choral sound covering a range of several octaves. Some of the pipes are primarily structural and aesthetic elements, while others have been cut across their width enabling the sound. The harmonic and singing qualities of the tree were produced by tuning the pipes according to their length by adding holes to the underside of each.
In 2007, the sculpture won (along with 13 other candidates) the National Award of the Royal Institute of British Architects (RIBA) for architectural excellence……
- Birch, Amanda (3 August 2007), “Tonkin Liu’s Singing Ringing Tree puts panpipes into park panorama”, in Building Design (bdonline.co.uk). Retrieved 5 June 2008.
- East Lancashire Environmental Arts Network (2005), A Panopticon for Burnley. Retrieved 5 June 2008.
- Royal Institute of British Architects (RIBA) (22 June 2007), RIBA National and European Awards. Retrieved 5 June 2008.
Aeolus at The Eden Project – Acustic Wind Pavilion